Porsche
>
991 (911) MK1 2012-2016
>
Suspension Upgrades
>
Ohlins Road & Track Suspension
>
Cancellation Kit for PASM Porsche 992 GT3
Cancellation Kit for PASM Porsche 992 GT3 - 35020-36
Code: 35020-36
Cancellation Kit for PASM Porsche 992 GT3
In order to fit Ohlins suspension kit to cars with PASM (Porsche Active Suspension Management) you will need to disable it with this PASM cancellation kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35020-36
The product you are viewing cross references to these numbers
In order to fit Ohlins suspension kit to cars with PASM (Porsche Active Suspension Management) you will need to disable it with this PASM cancellation kit.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
35020-36
35020-36
3502036
The product you are viewing cross references to these numbers
Product Vehicle Group
- We are unable to provide fitting details for this product at this time. Please contact us for further information.
€489.70
Now €479.91
In stock
Related products
Adjustable Suspension kit (without springs). Porsche 991 Carrera 2S / Carrera 2 2011>> Ohlins DFV Technology
Code: POSMP70
Adjustable Suspension kits .
Fits the following vehicles:
Porsche 911 (991) Carrera 2S /Carrera 2
The coil over set will be delivered without springs.
Coil springs need to be ordered separately.
The Öhlins Road & Track range for Porsche covers a major part of 991 Carrera / Carrera S models with kits for all needs. It's a kit designed for track day use and club racing but with the DFV technology it also offers superb handling and comfort on the way to and from the tracks.
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
prings ordered seperately
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster (approx. 8 mm lower than standard)
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster (approx. 10 mm lower than standard)
Coil Springs
Dustcovers
Use with original top mounts
Notes:
The recommended springs for this set are:
- front: spring rate 70 N/mm, article no. 48010-19
- rear: spring rate 120 N/mm, article no. 48010-39
For the POS MP70 a PASM cancellation kit with the article no. 35020-07 is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.
Fits the following vehicles:
Porsche 911 (991) Carrera 2S /Carrera 2
The coil over set will be delivered without springs.
Coil springs need to be ordered separately.
The Öhlins Road & Track range for Porsche covers a major part of 991 Carrera / Carrera S models with kits for all needs. It's a kit designed for track day use and club racing but with the DFV technology it also offers superb handling and comfort on the way to and from the tracks.
The Road & Track kit with DFV technology is a kit now developed with Porsche specific settings. The DFV technology acts like a high and low speed blow off valve and with adjustable compression and rebound the days of compromise are over.
This kit works surprisingly well on the road as well as at high speed on racing tracks, whether it is trackdays or racing. The settings have been developed using both shake rigs and testing by racing drivers to make sure the Öhlins DNA is present.
These kits are in a light weight design with most of the parts in aluminium and have been corrosion tested and comes with a two year limited warranty. They are also TÜV approved.
This kit is especially developed for high end racing and also TÜV approved.
Technical Info:
DFV (Dual Flow Valve)
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year Limited Warranty
Height adjustable
prings ordered seperately
Front Shocks:
McPherson Strut
Single bleed adjuster
Spring preload adjuster (approx. 8 mm lower than standard)
Coil Springs
Dustcovers
Use with original top mounts
Rear Shocks:
Conventional Shock Absorber
Single bleed adjuster
Spring preload adjuster (approx. 10 mm lower than standard)
Coil Springs
Dustcovers
Use with original top mounts
Notes:
The recommended springs for this set are:
- front: spring rate 70 N/mm, article no. 48010-19
- rear: spring rate 120 N/mm, article no. 48010-39
For the POS MP70 a PASM cancellation kit with the article no. 35020-07 is available. The cancellation kit is just plugged into the original suspension controls and deactivates control lamps and error reports when electronically adjustable EOM suspension is replaced by a mechanical system. No further programming is needed.
Product Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C2S 3.8L (400Bhp)
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
€2,597.99
Now €2,546.03
Orderable
Adjustable suspension set (without springs). Porsche 991 GT3 2013>>
Code: POFMR10
Adjustable suspension set (without springs)
Fits:
Porsche 991 GT3 (2013 onwards)
General Features:
TTX technology
2-way adjustable
Height adjustable
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty
Delivery without springs
Front:
McPherson strut, upside down
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Dustcovers
Use with original top mounts
Rear:
Conventional shock absorber
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Dustcovers
Use with original top mounts
Fits:
Porsche 991 GT3 (2013 onwards)
General Features:
TTX technology
2-way adjustable
Height adjustable
Rebuildable
Corrosion salt spray tested (ISO 9227)
2 year limited warranty
Delivery without springs
Front:
McPherson strut, upside down
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Dustcovers
Use with original top mounts
Rear:
Conventional shock absorber
Twin tube technology
Separate compression and rebound adjusters
Spring preload adjuster
Approx. 20 mm lower than standard with recommended setup
Dustcovers
Use with original top mounts
Product Vehicle Group
- Porsche 991 GT3 3.8L (475Bhp)
€5,659.08
Now €5,545.90
Orderable
Adjustable suspension kit. Advanced Trackday. Porsche 991 GT3 (2013-) 120/200 N/mm
Code: POFGR11
Adjustable suspension kit. Advanced Trackday. Porsche 991 GT3 (2013-) 120/200 N/mm
Fits:
Porsche 911 (991) GT3 RS, year 2015>>
General Features:
• TTX technology
• 2-way adjustable
• Height adjustable
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year limited warranty
Front:
• McPherson strut, upside down
• Twin tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 120 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts
Rear:
• Conventional Shock Absorber
• Twin Tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 200 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts
Notes: The set consists of 2 dampers POF 5R00 for the front and 2 dampers POF 6R00 for the rear.
Fits:
Porsche 911 (991) GT3 RS, year 2015>>
General Features:
• TTX technology
• 2-way adjustable
• Height adjustable
• Rebuildable
• Corrosion salt spray tested (ISO 9227)
• 2 year limited warranty
Front:
• McPherson strut, upside down
• Twin tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 120 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts
Rear:
• Conventional Shock Absorber
• Twin Tube technology
• Separate compression and rebound adjusters
• Spring preload adjuster
• Approx. 20 mm lower than standard with recommended setup
• Spring rate main spring 200 N/mm
• Spring rate helper spring 20 N/mm
• Dustcovers
• Use with original top mounts
Notes: The set consists of 2 dampers POF 5R00 for the front and 2 dampers POF 6R00 for the rear.
Product Vehicle Group
- Porsche 991 GT3 RS 4.0L (500Bhp)
- Porsche 991 GT3 4.0L (500 Bhp) / GT3 RS 4.0L (520 Bhp)
€6,263.83
Now €6,138.55
Orderable