Front upper control arm set tubular. Porsche 958 Cayenne

Porsche 958 Cayenne - 2010 to 2017
** Not for E-Hybrid**

Lift your 958 Cayenne or Touareg 3 inches or more but cant get the camber dialed back in? 

We have developed these control arms specifically for our 3" lift kits and more. Cayenne and VW Touareg's running more than 2.5 inches of lift require proper alignment. If you have a subframe drop and don't have upper control arms with camber adjustment there's a good chance your vehicle has too much positive camber. The factory lower camber adjustments do not have enough movement to put this chassis back into proper specs to drive safely and reliably.

After months of testing and lots of gruesome off-road testing. We are now happy to announce the release of our tubular upper control arms. These are built from DOM tubing with spherical ball joint on the spindle and Polyurethane mounting bushings at the rearward control arm mounting points. This will allow for maximum travel when off-roading which translates to better performance and ride.

Please Note:
If you are lowering subframe more than 1” with these tubular arms. You will have more camber in front beyond OEM specs 1-1.5 degrees negative.

Due to the nature of performance spherical ball joints they are not quiet like conventional OEM rubber bushings. You may hear clunks and minor clicking noises in some cases. This is perfectly normal and nothing to be alarmed about. It may be time for rebuild which these arms are 100% serviceable.

Arms may come black powder coated finish based on availability.