Porsche
>
991 (911) MK2 2016-2019
>
991 Turbo S Coupe 3.8L (580 Bhp)
>
Engine Rebuild Parts
>
Turbo Chargers / Intercoolers & Parts
>
Spacer sleeve for intercooler mounting. Porsche 911 turbo 1978 - 1989
Spacer sleeve for intercooler mounting. Porsche 911 turbo 1978 - 1989 - 93011023200
Code: 93011023200
Spacer sleeve for intercooler mounting.
Fits:
Porsche 911 turbo - 1978 to 1989
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011023200
The product you are viewing cross references to these numbers
Fits:
Porsche 911 turbo - 1978 to 1989
Click 'Zoom in' for large parts diagram.
Diagram ref no 14
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011023200
93011023200
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 911 1978-1989 3.3L Turbo (930)
Price: €19.90
In stock
Related products
TTE850 VTG upgrade turbocharger. Porsche 991.1 & 991.2 Turbo / Turbo S
Code: TTE10048
TTE850 VTG upgrade turbocharger for Porsche 991.1 & 991.2 Turbo / Turbo S
Welcome to our TTE850 VTG Stage for the 3.8-litre flat 6 engine. To construct a pair of TTE850 VTG we change the original compressor and employ a far larger and more efficient billet wheel and mill the compressor cover to optimum gap to match the new compressor profile. Still keeping the original turbine but clipping the original blades for greater flow and lower exhaust gas temperatures. We also remove some mass to improve response.
Equilibrium:
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with serial numbered balance test result document.
Product Highlights:
• Original BWTS VTG turbocharger as base part
• Very early response
• Billet Milled TTE compressor 6+6 BLADE
• High Flow Clipped Turbine
• Plug and Play installation
• 850PS+ Proven
• Proven TheTurboEngineers quality
• Single parts finely balanced then components assembled and core high-speed VSR balanced
• Supplied with a balance test result document
• Made in Germany
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€12,608.44
Now €12,356.27
Orderable
Aluminium intercoolers. Porsche 991 Turbo / Turbo S
Code: 8112
Racing and high performance intercoolers for all Porsche models make a great performance upgrade as well as an incredibly durable and reliable OE replacement.
CSF's Porsche 991 Turbo intercoolers have been race-tested, logged, and fully validated by some of the world's best Porsche tuners. These intercoolers have been regarded as the "Go-To" option for the best performance and value available in the performance aftermarket.
SPECIFICATIONS
• Fits both 991.1 & 991.2 Turbo/Turbos S vehicles. (2013-2019)
• 3D Scanned, CAD Designed and 3D-printed prototype; Tested in collaboration with automotive engineering firm RK Autowerks. Providing the absolute best fitting Porsche 991 Turbo intercoolers available in the aftermarket.
• CFD tested (Computational Fluid Dynamics) cast end tanks with several post machining processes for the absolute best tolerance specifications and maximum airflow distribution throughout the core.
• All OEM mounting points are retained with the OEM clip-in hardware design. Utilizing factory hardware, for an OEM-level installation. (CSF Exclusive)
• OEM style "Quick-Connect" machined fittings for precise fitment, lock and seal.
• Finished with an aerospace grade, nano-particle, heat dispersion coating that dissipates heat ~35% better than uncoated raw aluminum. (~ $500.00 value)
• "Drop-in fitment", no modifications or grinding to metal brackets, etc.
• (Requires slight trimming to the plastic intercooler shrouds)
• Individually leak / pressure tested to 120 PSI
• Individually inspected for quality control
• Instruction manual included CLICK HERE TO DOWNLOAD
• Specifically cut foam protective packaging to ensure damage free shipment
• Manufactured completely in house by CSF; a tier 1 OEM manufacturer with over 50 years of cooling system manufacturing experience. Over 500,000 units sold every year and over 40 million units sold globally.
CORE DESIGN
• 8mm fin height louvered external fin with 6.5mm fin height staggered internal fin. Designed to maximize surface area contact and heat dissipation.
• Wind tunnel optimized and dyno tested for low pressure drop with best performance
• CSF's "Ultimate-Boost" High-performance bar / plate core. Built in house and pressure tested to 120 PSI
• 4.53-inch thick core compared to OEM's 3.15-inch core (115mm vs 80mm)
• Increased flow area by 43.75%
Cross reference numbers
99111064073, 99111063973
• Increased surface area by 70% (8.5m^2 vs. 5.0m^2)
• Built in-house by CSF (Only high-performance company to manufacture their own intercooler cores)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
8112
8112
99111064073
99111063973
99111064072
99111063972
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
€3,224.90
Now €3,160.40
Orderable
Performance intercoolers. Porsche 991 Turbo/Turbo S 2013>>
Code: ICM-270
Performance intercoolers.
To Fit:
Porsche 991 Turbo and Turbo S 2013 onwards
A true performance upgrade intercooler for the 991 Turbo / Turbo S
This is the most refined of all products we carry today!
• Significantly improved Air flow! (see graph images).
• Cooler air to your engine!
• High quality high density UK made motorsport cores.
• 3D freeform designed cast end tanks
• Custom designed carbon fiber ambient air guides.
• Comes with high quality silicone hoses and accessories for installation.
From do88: Right from the beginning we realised that we could not sacrifice anything to keep the cost down we just had to do the best possible in the space available in the car!
First of all we made a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which have great cooling efficiency along with a low weight.
With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.
To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment to ensure perfect fit to the vehicle integrated air guides and our intercooler.
To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to design custom silicone hoses for all positions. The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature!
Another important aspect for cooling performance are to use all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.
Using this design in building our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that its all made of aluminium. Our intercooler weight is 5,4 kg (11,9 lb) per piece and the 991 OEM intercooler weights 3,1 kg (6,8 lb) per piece. It might sound like a big weight increase but compared to other actors on the market with intercoolers in this size it's a low weight!
At the same time as our intercoolers lower the intake temperature, they also flow better than the 991 original intercoolers! Please have a look at the air flow rates at different pressure drops in the graph below where we compared our intercooler with hoses to the original intercooler with hoses in our own Superflow SF-1020 Probench to verify the final result!
Keep in mind that the OEM intercoolers was designed for only the power level the car was built for originally. A power increase may cause your stock intercoolers to not be efficient enough. So even on an engine with a software tune only or using your car in hot climate the do88 performance intercooler kit will give a performance increase over the OEM intercoolers!
This do88 performance intercooler kit comes as a complete package with all parts necessary for installation.
Please Note! Some modifications need to be done when installing this intercooler kit, please read step 29,31 & 35 in the installation guide before placing order.
Installation Instruction
For maximum performance, and easier installation, this kit can be combined with our do88 inlet hoses!
Included parts in this kit:
• Performance intercoolers
• Carbon fiber air guides
• Silicone hoses Hose clamps
• Rubber seals
• Installation hardware
When you order this kit, there is one choice that has to be made: Y-Pipe: Please Select which Y-Pipe you have on your car. OEM or do88 Performance.
Equivalent Porsche OEM part numbers 99111063972, 99111063973, 99111064072, 99111064073 (for cross reference only)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
ICM-270
The product you are viewing cross references to these numbers
To Fit:
Porsche 991 Turbo and Turbo S 2013 onwards
A true performance upgrade intercooler for the 991 Turbo / Turbo S
This is the most refined of all products we carry today!
• Significantly improved Air flow! (see graph images).
• Cooler air to your engine!
• High quality high density UK made motorsport cores.
• 3D freeform designed cast end tanks
• Custom designed carbon fiber ambient air guides.
• Comes with high quality silicone hoses and accessories for installation.
From do88: Right from the beginning we realised that we could not sacrifice anything to keep the cost down we just had to do the best possible in the space available in the car!
First of all we made a lot of investigation and comparisons between different core types and at last really fell for a high density motorsport core which have great cooling efficiency along with a low weight.
With a great core in place we started to refine the end tank design which brought us to a decision to make cast end tanks as we could then control the air flow distribution over the core in a very precise way. This is very important as a good tank design will be beneficial for both pressure drop and cooling efficiency.
To be able to fit an intercooler with appropriate thickness for the job it was also necessary to design a new upper ambient air guide. This was designed in our 3D scanned environment to ensure perfect fit to the vehicle integrated air guides and our intercooler.
To achieve the best air flow distribution over the core we made intercooler end tanks with 70 mm (2 3/4 inch) connections which then made it necessary to design custom silicone hoses for all positions. The hoses are 3D designed with airflow in mind where we CFD tested each hose during development to ensure best possible flow rate of all parts! The hoses between turbocharger and intercooler are special silicone hoses that can withstand up to 240°C (464°F) continuous temperature!
Another important aspect for cooling performance are to use all ambient cooling air available, to optimize this part we include air block rubber seals for all surfaces where the ambient air guides must seal properly.
Using this design in building our intercoolers the weight increase compared to the OEM ones is relatively small considering the size of our intercooler and that its all made of aluminium. Our intercooler weight is 5,4 kg (11,9 lb) per piece and the 991 OEM intercooler weights 3,1 kg (6,8 lb) per piece. It might sound like a big weight increase but compared to other actors on the market with intercoolers in this size it's a low weight!
At the same time as our intercoolers lower the intake temperature, they also flow better than the 991 original intercoolers! Please have a look at the air flow rates at different pressure drops in the graph below where we compared our intercooler with hoses to the original intercooler with hoses in our own Superflow SF-1020 Probench to verify the final result!
Keep in mind that the OEM intercoolers was designed for only the power level the car was built for originally. A power increase may cause your stock intercoolers to not be efficient enough. So even on an engine with a software tune only or using your car in hot climate the do88 performance intercooler kit will give a performance increase over the OEM intercoolers!
This do88 performance intercooler kit comes as a complete package with all parts necessary for installation.
Please Note! Some modifications need to be done when installing this intercooler kit, please read step 29,31 & 35 in the installation guide before placing order.
Installation Instruction
For maximum performance, and easier installation, this kit can be combined with our do88 inlet hoses!
Included parts in this kit:
• Performance intercoolers
• Carbon fiber air guides
• Silicone hoses Hose clamps
• Rubber seals
• Installation hardware
When you order this kit, there is one choice that has to be made: Y-Pipe: Please Select which Y-Pipe you have on your car. OEM or do88 Performance.
Equivalent Porsche OEM part numbers 99111063972, 99111063973, 99111064072, 99111064073 (for cross reference only)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
ICM-270
99111063972
99111063973
99111064072
99111064073
The product you are viewing cross references to these numbers
Product Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
Y-Pipe
Prices from: €4,713.70