Steering Racks
Fits:
Porsche 911 65-89 LHD Cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
STEERINGKIT911LHD
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 65-89 RHD Cars
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
STEERINGKIT911RHD
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
*** Special Order Product allow 10 - 14 Days for delivery ***
Fits:
Porsche 911 74-89 LHD
Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.
It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.
You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.
If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.
For installation instructions:
– cars WITH air conditioning CLICK HERE
– cars WITHOUT air conditioning CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EZPSKITLHD
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
** Special Order Product allow 10 - 14 Days for delivery **
Fits:
Porsche 911 74-89 RHD fits cars with and without air conditioning
Do you find the steering in your 911 too heavy whilst parking or taking hairpin turns? Have you fitted wider tires, a smaller diameter steering wheel or a more direct steering rack? This is the solution, a speed sensitive power steering unit that offers maximum assistance at low speeds and minimum at high speeds, therefore the steering "feel" remains.
It is possible to switch off the system. It is also possible to fit an on/off switch in the ignition switched 15+ thin red cable which will you to switch the system on or off at any time when driving. This will not damage the power steering in any way.
You can connect the blue speed sensor wire to the speedometer, this will reduce the assistance when you drive faster.
If this has been connected and you find the steering too light, you can place a “torque limiter” between the torsion sensor and the ECU which will allow you to adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.
For installation instructions please CLICK HERE
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EZPSKITRHD
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
** Special Order Product allow 10 - 14 Days for delivery **
Fits:
Porsche 911 67-89 LHD without air conditioning
Have you fitted an EZ Power Power Steering conversion kit but find the steering a little light and would like a little less assistance?
You can connect the blue speed sensor wire to the speedometer as this will reduce the assistance when you drive faster.
If this has been connected and you find still find the steering too light, you can fit this "plug and play" torque limiter between the torsion sensor and the ECU which will allow you to adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.
This can also be used to recalibrate the steering centre position.
The torque limiter works with the use of a potentiometer to weaken the torque signal from the sensor so can be adjusted to the preferred level of assistance.
Download the detailed installation instructions- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
** Special Order Product allow 10 - 14 Days for delivery **
Fits:
Porsche 911 67-89 RHD with and without air conditioning
Porsche 911 67-89 LHD without air conditioning
Have you fitted an EZ Power Power Steering conversion kit but find the steering a little light and would like a little less assistance?
You can connect the blue speed sensor wire to the speedometer as this will reduce the assistance when you drive faster.
If this has been connected and you find still find the steering too light, you can fit this "plug and play" torque limiter between the torsion sensor and the ECU which will allow you to adjust the power steering from 100% to nearly 0% to select exactly the amount of assistance you prefer.
This can also be used to recalibrate the steering centre position.
The torque limiter works with the use of a potentiometer to weaken the torque signal from the sensor so can be adjusted to the preferred level of assistance.
Download the detailed installation instructions
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 24.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134722303
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
OEM Part Number: 90134722303/1
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 24
Powerflex. Replacing your car rubber bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-405
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
OEM Part Number: 90134722303/1
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 24
Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.
Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.
If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.
Replacing your car rubber bushes with Polyurethane Suspension Bushes will give you:
- Better road holding
- Constant steering geometry
- Increased tyre life
- More responsive steering
- Longer service life of suspension components
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-405BLK
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
OEM Part Number: 90134722303/1
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
POWERFLEX Heritage Collection. For Modern Day Classics.
A range of bushes engineered for the road to compliment your classic car.
POWERFLEX Heritage Collection bushes are manufactured using modern day materials with properties biased for the road. These dark grey coloured bushes will improve any collector's car, whilst retaining the same standard appearance of a rubber bush.
Click 'Zoom in' for large parts diagram
Diagram ref no 24
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
PFF57-405H
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 / 912 / 930 All
If you have never changed your lower steering column bearing that's located in the smuggler's box, there's a good chance that the bearing inside the rubber housing is non-existent. This bearing helps to prevent slop in the steering linkage assembly, but over time, the needle bearing inside gets corroded and ultimately disintegrates. This is often mis-diagnosed as a bad tie rod end because effect on the steering response is very similar. Rennline has created a billet aluminum housing the includes a pressed in needle bearing and unlike the factory unit, this one includes two weather seals to protect the bearing.
Replace it once and don't worry about it again.
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
STOP THE STEERING WHEEL WOBBLING.
Easy Repair for Loose Steering Wheels
A Definite Time Saver
This is a mechanics dream solution to an annoying job. The upper steering bearing on Porsche has an inner plastic sleeve that constantly wears out. The bearing is still good but the plastic is gone. Replacement normally requires about 3 hours, however, with this product you can remove your steering wheel and tap the new bushing in place in 10 minutes.
Fits:
Porsche 911 1974-89
Porsche 930 1975-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92834773902
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Does your 74-89 911/912/930 have the common slop, wiggle and/or rattle in the steering wheel? This is a common issue with these cars and is the result of a worn-out OE 91134702901 bearing liner. Rennline's new Steering Column Support Bushing installs in about 15 minutes and leaves you with a smooth/quite steering column. This is a big improvement over the factory replacement sleeve that takes hours to replace and is sure to fail again down the road.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
I69
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 912
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram,
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134720102
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 912
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134720102
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
More than 30% stiffer than the original equipment
Guaranteed fitment
Fits:
Porsche 912
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 18
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134720102HD
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134730800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134730800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 914 (1970 - 1976)
Porsche 914/6 (1970 - 1972)
Porsche 911 G (1977 - 1983)
Porsche 911 Turbo (1977 - 1989)
Porsche 911 Carrera (1984 - 1989)
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134705600
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1978-1989 3.3L Turbo (930)
2 required per car. Sold as single.
Fits:
Porsche 911 1965-89
Porsche 930 Turbo 1975-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134724800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
2 required per car. Sold as single.
Fits:
Porsche 911 2.0-3.3 01/63-07/89
Porsche 912 1.6 01/65-02/70
Porsche 914 1.7-2.0 01/69-02/76
Click 'Zoom in' for large parts diagram.
Diagram ref no 23
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90134724800
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Reconditioned Alternators are sold on an exchange basis, A surcharge of £1000.00 will be held and then refunded when the old one is returned.
Fits:
Porsche 930 3.0L, 3.3L 1975-89
The most common power steering faults are:
- Leaking power steering
- Torn Gators
- Hard to steering when idling
- Hard to steering one-way
- Steering-Wheel not self-centering
- Noise when Idling
- Noise when steering
- Judders when steering
- Loss of all power in steering
- Semi-Loss of power in steering
- Electric steering problems
Above are just some of the problems our customers are faced with on a day-to-day basis with their power steering units. We can replace your old unit with a Reconditioned unit. If we don't have a replacement available, we can take in your own unit and recondition it for you. Where a new unit can cost £100's we can recondition/supply reconditioned units at a fraction of this price!
All reconditioned racks come with 1 Year or 12,000 miles warranty!!
- The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
- Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
- Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
- All surcharges and exchanges are subject to our terms and conditions.
PLEASE NOTE:
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93034701000
The product you are viewing cross references to these numbers
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1965-89
Porsche 914 1970-76
Click 'Zoom in' for large parts diagram.
Diagram ref no 21
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134702901
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1974-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134707303
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1974-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134707303
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 1974-89
Porsche 930 Turbo 1975-89
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91134707204
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)