Exhaust Tail Pipes

Exhaust tail pipe Porsche 911 GT3 GT3 RS and 911 R
with polished finish



Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R

DOES NOT FIT 997

This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - POLISHED
Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. A special rolling procedure is used. It is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TSPO99112.023.A

The product you are viewing cross references to these numbers

Exhaust tail pipe Porsche 911 GT3 GT3 RS and 911 R
with titanium sandblasted finish



Fits
Porsche 911 GT3 (991.1 & 991.2)
Porsche 911 GT3 RS (991.1 & 991.2)
Porsche 911 R

DOES NOT FIT 997

This trim can be fitted on the 991 R, GT3, GT3 RS models, both mk1 and mk2. Not for 997
The component is perfectly interchangeable with the original components, following the instructions in the constructor's workshop manual.

END TIPS DESIGN - STRAIGHT CUT
Straight-cut tailpipe with internal rolled lip.
END TIPS DIMENSION - 50mm
The value refers to the external dimensions of the exhaust end tip.
END TIPS FINISH - SANDBLASTED TITANIUM
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance.
END TIPS NUMBER AND POSITION
2 + 2 CENTRAL
There are two pairs of tailpipes with a gap between them, in the centre of the rear bumper.
TECHNOLOGY
MATERIAL
AISI 304 STAINLESS STEEL
AISI 304 STAINLESS STEEL
A choice stainless steel ideal for aggressive environments where combustion emissions can cause serious chemical corrosion on other types of metal.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TSPO99112.023.T

The product you are viewing cross references to these numbers

Sports exhaust rear silencer titanium straight pipe Porsche 911 GT3 GT3 RS and 911 R 2013-2019
Made from titanium
Straight pipe replaces rear centre silencer



FITS 991.1 and 991.2
Porsche 911 GT3 and GT3 RS 2014-2016
Porsche 911 GT3 and GT3 RS 2017-2019
Porsche 911 R 2016
NOT FOR 997

RACETRACK USE ONLY
These components are designed and developed for racetrack use and to maximise the car's performance. They are not street legal and must be installed by professionals in the sector

Replaces centre silencer and tailpipe trims

SOUND - TUBI SOUND
Tubi Sound is the standard sound of Tubi Style exhausts, louder and more powerful than the original sound. This sound represents our brand
END TIPS DESIGN - ROLLED LIP
Tailpipe with external rolled lip

OUTER PIPE DIMENSION - 65mm
CENTRE TIP DIMENSION 50mm
The value refers to the external dimensions of the exhaust end tip

END TIPS FINISH - SANDBLASTED
Titanium is used sandblasted, completely free from flaws, in its natural colour, for a truly stunning appearance

END TIPS NUMBER AND POSITION - 3 CENTRAL
The end tips emerge from the centre

MATERIAL - TITANIUM
KSTi -1,2 ASN titanium alloy was specifically developed for motorsport exhaust systems. It guarantees excellent resistance to oxidation even at high temperatures, with mechanical characteristics similar to those of grade 2 titanium.

CENTRE SILENCER REMOVAL
Complete removal of the centre silencer minimises exhaust back pressure and delivers optimum results in terms of performance and weight reduction

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TSPO991GT317.001.T

The product you are viewing cross references to these numbers

Titanium exhaust tailpipe tip. Porsche 997/ 991 GT3 and GT3 RS
Available in black or clear

Outer diameter is 90mm

Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS

Please note: This will not fit cars:
- with engine codes DNSA / DNSB - 4.0L with 520 Bhp
- released after 06/2017 with engine codes DGG / DGGA / DGGB


Extremely light weight and strong, this titanium GT3 style exhaust tip is perfect for your
modern GT3/RS or custom air-cooled project.
45% lighter than stainless steel, they weigh 825 grams saving significant weight at the rear

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-EX-01

The product you are viewing cross references to these numbers

Titanium exhaust tip titanium fastenings



Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS

Titanium exhaust fastener kit for Porsche 911 GT3/GT3RS style exhaust tips.

The kit includes 3x titanium flange nuts and 3 correct washers (two off-centered, and a standard washer).

Lighter than steel, they will not corrode and look good indefinitely.

The black nuts and washers are black titanium nitride coated, the silver, raw titanium.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-EX-02

The product you are viewing cross references to these numbers

Titanium exhaust tip titanium nut and bolt fastening kit.

Fits
Porsche 997 GT3
Porsche 997 GT3 RS
Both Gen 1 and Gen 2
Porsche 991 GT3
Porsche 991 GT3 RS

Titanium exhaust fastener kit for Porsche 911 GT3/GT3RS style exhaust tips.

The kit includes 3x titanium flange nuts, 3 correct washers (two off-centered, and a standard washer) and 3 x bolts to install the exhaust tips when using a center muffler bypass exhaust. Bolts are raw titanium.

Lighter than steel, they will not corrode and look good indefinitely.

The black nuts and washers are black titanium nitride coated, the silver, raw titanium.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SL-EX-03

The product you are viewing cross references to these numbers