Front Spoilers / Bumpers

Carbon fibre front bumper dive plane kit.

Available in Gloss or Matte Carbon Fibre



Fits
Porsche 991.1 GT3 / GT3 RS - 2012 to 2016

The Dive Planes for the Porsche 991.1 GT3/GT3RS were specifically designed to increase front-end downforce, increase the high-pressure airflow to the factory intake duct, and to keep drag increase minimal.

Depending on driver preference, no rear aero is needed to balance out these units. We have seen up to 0.7 second gains due to increased front end grip at high speed corners which allows improved corner speed. If as a driver you feel the car needs more rear stability, we would not suggest these units without adding a rear aerodynamic device.

The units were designed in CAD using scan data and optimized using CFD within ANSYS Fluent.

These units are constructed from 1.5mm thick pre-preg, autoclaved cured, 2x2 twill carbon in both a matte and gloss clear coat.

Dive planes, also referred to as canards, allow you to shift the aero balance forward, possibly aiding you and your setup in balancing out a large rear wing or diffuser.

Kit Includes
• Dive Plane x 4 (Upper x 2, Lower x 2)
• 3M VHB Tape (4 Pieces, 1 for each Dive Plane)
• Install Template

Front bumper canards in high gloss carbon fibre. 



Fits:

Porsche 991.1 911 GT3
Porsche 991.1 911 GT3RS
Porsche 991.1 911 R
Porsche 991.2 911 GT2RS

Designed to increase downforce to front end in conjunction these front bumper canards (dive planes) are made using pre-preg autoclave carbon fiber with a high gloss finish. 

Installation can be done with double sided tape to prevent the drilling of holes into factory front bumper.

Front bumper lower splitter kit. Porsche 991.1 GT3 RS

Fits:
Porsche 991.1 GT3 RS

Front splitters are very effective at producing front end downforce without significantly increasing drag and this is done by creating a large pressure delta between the top and bottom surfaces. We then incrementally improved the front splitter by adding design tweaks to the underside of the splitter to improve flow with our carbon splitter diffusers. All of this adds up to a front splitter kit for the 991.1 GT3RS that creates a large amount of additional front end downforce.

The splitter is produced from a carbon thermoplastic, which is the same material used in high forms of Motorsports. The material is not brittle, so no more issues with cracking like carbon fiber and ABS. It will not grab and bend under the car like aluminum units either. It is a great splitter material.

Bracketry was designed from scan data, precision cut and bent to ensure repeatability. The carbon diffusers were developed in CFD to promote flow and improve downforce generation. The splitter was designed to balance out large rear wings, more specifically our V1x for the chassis.

Kit Includes

• Carbon Polyweave Splitter 
• Polyweave Grind Strake x 4
• Carbon Splitter Diffuser x 2
• Sheet Aluminum Diffuser Block Off x 2
• Sheet Metal Bracket Kit x 13
• Steel Cross Beam Tube 
• Clevis x 4
• Splitter Support Rod Assy x 2
• Hardware Kit, Including all Hardware Necessary for a Seamless Install

Features
Greatly Increases Front End Downforce
Produces High Downforce for Large Rear Wings
Capable of Handling 300+ Lbs
Constructed From Carbon Thermoplastic, Which Offers Strength, Low Weight, Durability, and a Great Appearance
Same Material Used in Various Forms of Racing, Including Indy Car, NASCAR, and F1
Non-Invasive / Easy Install

Specifications
Front Splitter is Manufactured From Carbon Thermoplastic, Offering Superior Strength, Weight, Durability, and Appearance to Many Other Options
Will Not Grab and Bend Surfaces Like Aluminum Units
Will Not Crack and Break Like Carbon and ABS Units
Abrasive Resistant While Stiff
CNC Cut and Bent Brackets
Stainless Hardware Throughout

Front bumper, primed.



Fits:
Porsche 991 GT3 RS 2014-21

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150519196

The product you are viewing cross references to these numbers

Front lower spoiler. Black.



Fits:
Porsche 991 GT3 RS 2014-21
for vehicles with 'PASM' electronic damper control (option code: 475)

Click 'Zoom in' for large parts diagram.
Diagram ref no 14

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991505525911E0

The product you are viewing cross references to these numbers

Carbon fibre Front lower spoiler,.
Manufactured in Carbon Fiber prepreg autoclave molded, cured with glossy clear finish.



Fits:
Porsche 991.1 GT3 RS

Please note: This is a special-order item manufactured to order. In some cases, please allow 4 – 5 weeks for the delivery. Special order items cannot be cancelled from this supplier once your order has been placed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SFC991505525901E0

The product you are viewing cross references to these numbers

Front approach / front spoiler lip for Porsche 911(991) GT3 / GT3 RS in cup look.
Front spoiler lip, 3 pieces, suitable for Porsche 911(991) GT3 / GT3 RS year 12/2011-01/2017.
Suitable for the model/body variants GT3 and GT3 RS



PLEASE NOTE: The item can only be used in conjunction with stabilizers. Please CLICK HERE for more information.

• in cup optics
• Extreme contact pressure. Especially for racing purposes
• Without certificate, as specifically for racing purposes
• Including mounting accessories if necessary
• Includes assembly instructions
• The front spoiler lip is made from the innovative and high-quality material Fiberflex. The advantages of this new composite material: Extremely high flexibility combined with great stability, splinter resistance and non-flammability. Very high manufacturing quality and low weight even allow it to be used in professional racing. The characteristic black surface is characterized by good processing options and guarantees professional results. Products made from Fiberflex are ideal for repairs and other conversion work thanks to their excellent cutting and gluing properties.
• Uniform surface structure enables painting without major preparatory work (product is unpainted)
• Material is flexible

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Vorsteiner V-RS Aero Front Apron Carbon Fiber.
Material: Autoclaved 1×1 Pre-Preg Carbon Fiber
w/ UV Inhibiting Clear Lacquer Coating.

Fits:
Porsche 991 GT3 RS only

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POV1120

The product you are viewing cross references to these numbers

Vorsteiner V-RS Aero Wing Blade & End Caps.
Material: Autoclaved 1×1 Pre-Preg Carbon Fiber
w/ UV Inhibiting Clear Lacquer Coating.



Fits:
Porsche 991 GT3 RS only

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

POV1170

The product you are viewing cross references to these numbers