铝制进气歧管竞赛版 74 毫米节气门保时捷 996 Turbo/S/X50/GT2 IPD
马力提升范围从 30 到 35,增压响应显著改善,从而实现更长、更强、当然更令人愉悦的功率曲线。IPD 增压室在整个功率带内提高马力,特别是在最需要的地方,从中端到高端。
996 Turbo Plenum 的安装非常具有挑战性,并且只能由经验丰富且合格的保时捷技术人员进行安装。
996 Turbo 74mm“竞赛”增压室设计用于经过更严格改装的涡轮增压器,功率超过 600 马力。尽管这种 74mm 应用已在各种涡轮增压器上取得了巨大成功,从轻度改装到 1000+ HP。
此应用需要更大的 74 毫米保时捷节气门体(需额外购买),并附带其他硬件以完成套件。这款“Competition Turbo”增压器将帮助改装后的 996 Turbos 实现最大性能。
更大的集气室产生的空气流量和空气速度增加是为了与更大的涡轮增压器、中冷器、进气管道、高流量 Y 型管和更积极的软件配合使用。
马力增益从 35 马力左右开始,并在转速范围内提供略高的最大功率,从而创造更好的顶端性能,而不会出现工厂空气分配器所经历的功率下降。
996 Turbo 竞赛版增压器:马力增加 24 / 扭矩增加 26。需要升级工厂 68 毫米 TB 和 996 Turbo 74 毫米节气门体
适合:
保时捷 996 Turbo/S/X50/ GT2
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
96274
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
SET OF 2
Fits:
Porsche 964
Porsche 993
Porsche 996
Porsche 997
Solid engine mounts are a smart upgrade to any track or aggressive street car, and were installed on Porsche factory race cars. Stock mounts are made of compliant rubber, and contribute to imprecise shifting and inferior throttle response. Solid mounts create slightly more interior vibration than rubber mounts, but securely connect the engine and transmission assembly to the car's unibody, creating a crisper throttle response and shifter feel. Rennline's solid mounts are CNC machined from 6061 aluminum for strength and light weight, and come as a pair with new Grade 8 mounting hardware. Sold as a set of (2)
Motorsport Product
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
M08
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
Fits:
Porsche 911/930 1965-89 Coupe And Targa
Porsche 964 Turbo 1990-93*
Adding solid or semi-solid motor mounts is a very popular upgrade for any 911 that is driven the way it was intended to be. Unfortunately the factory mild steel engine carrier is very weak and flexable, defeating the purpose of upgraded mounts. Rennline's RSR Style stainless steel engine carrier eliminates that flex due to its upper and lower horizontal flanges replicating those on the factory RSR race cars. Additionally, the Rennline mount incorporates gusseted mounting points built to withstand extreme horsepower and race abuse. This engine mount is by far the strongest engine brace on the market today.
* 964 Turbo's will require aftermarket or RS engine mounts with m12x1.5 threaded bolt.
Note: Pictures may not show actual product.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
M01RS
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
SET OF 2 Includes three pairs of inserts in varying densities
Fits:
Porsche 964/993/996/997
The Rennline Tune-able Engine Mount for the 964, 993, 996, and 997 offers the ultimate in adjust ability for your car. Replacing your compliant factory mounts will decrease engine movement resulting in better acceleration, handling and significantly increased shifter feel. This is the ultimate solution for almost any car, and allows you to tune our mounts for the way you drive. Our mounts are CNC machined from billet aluminium and include three pairs of inserts in varying densities. Tune your mounts by using the softer inserts to reduce engine slop and avoid missed shifts in your street car, or utilise the stiffest inserts to get the most from a more focused track car. You can even mix and match, giving you 9 possible combinations to let you dial in our mount to your specifications. Here at Rennline we know you want your Porsche to be flawless, and that is why we are Driven to Improve Excellence.
相关参考编号
相关编号、被取代编号、交叉引用编号或替代编号,供比较之用。
M18
您正在查看的产品与这些编号存在交叉引用关系
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) GT2 1994-97
- Porsche 993 (911) TURBO S 1994-97
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche 997 GT3 2007>>
- Porsche 997 GT2 2007>>
- Porsche 997 MKII Carrera C2 3.6L 2009>>
- Porsche 997 MKII Carrera C4 3.6L 2009>>
- Porsche 997 MKII Carrera C2S 3.8L 2009>>
- Porsche 997 MKII Carrera C4S 3.8L 2009>>
- Porsche 997 MKII GT3 2010>>
- Porsche 997 MKII Turbo 2009>>
- Porsche 997 MKII GT2 RS 2011>>